Not all torsion springs are the same. Each spring is defined by its wire size, inside diameter and length, and those three measurements decide how much weight it can lift and how long it will last. Installing the wrong spring leads to an unbalanced door, a strained opener and an early spring failure. GDS-RepairParkRidgeIL sizes every torsion spring to the door it is going on.
How GDS-RepairParkRidgeIL Sizes a Torsion Spring
Our technicians consider the door's weight, height and track radius, along with the drum type. From there, we choose a spring that will hold the door in balance through its full travel. On wider or heavier doors, two springs share the load.
What is cycle life?
One cycle is the door opening and closing once. Standard torsion springs are commonly rated for about 10,000 cycles. If your family uses the garage door several times a day, that rating can be reached in just a few years.
High-cycle spring options
Upgrading to a high-cycle spring, built with a heavier wire and longer body, can extend spring life significantly. It costs a little more up front but often saves the cost of another replacement down the road.
Tips from GDS-RepairParkRidgeIL for Longer Spring Life
- Have springs lubricated during routine maintenance to reduce friction and rust.
- Keep the door balanced, since an unbalanced door wears springs faster.
- Replace both springs at the same time on two-spring doors.
Need a spring that lasts? Call GDS-RepairParkRidgeIL at 773-828-4747.